This solution will remove wax residue with ease while cleaning and sanitizing your roller heads and other metal implements. The all natural citrus aroma alone will make you want to use this soak sanitizer solution. Designed to be used with the ReMoveIt Self Cleaning System. Can be used approximately 3 to 4 times before replacement of liquid is needed.

Features:

• Effective soak sanitzer solution
• Clean and disinfect roller heads and implements
• Eliminates any cross-contamination
• Non-toxic and environmentally safe
• Wonderful Citrus-scent
• Cleans up to 3-4 cycles

This solution can be used over and over while cleaning up from 10 to 12 cycles of used Roller Heads~

1. Gently pour the ReMoveIt Soak Sanitizer Solution into ReMoveIt Self Cleaning System all the way to the fill line. Also remember, the plastic container can be used to refill solution!
2. Take off the used roller heads from wax cartridge and place in basket
3. You will then submerge the basket into ReMoveIt Soak Sanitizer Solution. Be sure to put the cover back on the unit and then turn the unit on to vibrate. Wait 30 minutes for unit to shut off.
4. Then pick up the basket and shake excess liquid off roller heads. You can then pour clean roller heads into wash pail or sink. Rinse roller heads with antibacterial soap and cool water for 1 minute to remove any soak residue. Rinse one more time with water.
5. Now, shake off excess water and let dry throughout the day or over night. Use the ReMoveIt Soak Sanitizer Solution only with Nice 'N Neat™ roller heads. Also, remove roller after each cycle.